Power: 60W
Brightness: 8000LM
LED chip: Seoul-CSC flip
Light emitting structure: four-sided light
Light emitting angle 360°
Material: 6065 lathe cutting aluminum alloy, thermal conductivity 3.0
Cooling fan: double ball bearing silent fan, speed 9500r/min
Thermal capacity: ultra high
Fan Durability: High Durability
Fan noise: 55 decibels, lower than the engine noise, can hear audible noise after the flameout.
Spotlighting ability: strong
Applicable location: high beam, low beam, fog lamp
Color temperature: 6000K immutable
Working temperature: -40°C~+100°C
Waterproof rating: IP67
Easy to install: high
Dimmable range: 360° dimming
EMI shielding: shieldable
Positive and negative: no polarity of the power plug
Weight/sets: H1-160G, H4.H13.9004/9007-240G, H7.H11.9005.9006.9012-190KG,
Packing size: 12.2CM*5.1CM*28.2CM
structure
1. Appearance
This paragraph LED automotive headlights adopt aluminum design, aluminum is used in 6065 aircraft superconducting aluminum, thermal conductivity of 3.0 or more. Full lathes for forming aluminum parts (non-die castings, poor flatness of die castings, uneven aluminum density, thermal conductivity 0.8-1.1).
2. Chip
This paragraph LED car headlights use Philips genuine LED wick, South Korea Seoul integrated package LED-CSC finished chip, color temperature of 6000K is white, each lamp a total of 4 chips, the whole light emitting angle 360 ??° without dead ends. The actual output power of each CSC chip is 10.2 watts, and the output light flux of the CSC chip is 1W=130 LM.
3. Fan
This LED car headlight uses a double ball bearing ultra-quiet fan with a speed of 12000r/min. The fan is used as the core cooling component of the whole lamp, and its waterproof rating is IP68. It can withstand short-time water intake and long-term humidity, but it can not resist the winding of mud, sand, hair, plastic bags and other sundries. If the customer purchases during sales, The model is H1/H4/H7. Users must cover the headlight dust cover to ensure the service life of the LED headlamps.